Artwork Print & Cut / MadCatzTE2+ TE2 2nd Generation

$13.46 USD
Write a review
| Ask a question
Shipping calculated at checkout.

お急ぎください。在庫は残り 個です。

Paper Option: マット

Vendor: akecon
Availability : In Stock Pre order Out of stock

shopify paypaypalamazon paymentsapple paygoogle payvisamasterjcbamerican expresspaidylawsonfamilymartsevenelevenministop

You must create the artwork data yourself using the template.

High-resolution, high-definition prints

Artwork prints are printed using top-of-the-line professional printers.
They provide vibrant, professional-quality artwork reproductions.
The printer is capable of 1,440 dpi resolution and uses a 9-color pigmented ink system.
This duplicates artwork with amazingly smooth tonal rendition.

Each print is laser cut to the optionally selected specifications and
Receive prints that come with button insert cuts designed to fit your selected brand.

Ordering Notes
When submitting artwork, do not set the template color space to CMYK.
The template is set to RGB, so please leave it as it is.
Changing to CMYK may result in colors that are printed differently than expected.

MadCatzTE2+ TE2 2nd generation only

This item is for MadCatzTE2+/TE2 2nd generation only.
Please use the template below to create your artwork.

MadCatzTE2+ Template
*Please be sure to read the template guide.

Note: If you use a template other than the one provided, you may not get the results you expect.

Option Guide

Describes the options for ordering artwork.

Insert cut or not

This is the choice of whether or not the red portion of the image needs to be cut.
Even if "NO" is selected, the button insertion hole itself will be cut.
This question asks if the inside of the button should be cut out.
If you do not need it, please select NO, in which case the insert cutout will not be included in the product.
This option is to reduce the burden on our work staff.

If you select "YES," please select the manufacturer of the button you wish to use next.
It will be optimized for the selected manufacturer.

Uploading Artwork

Upload the artwork file created using the template.
The maximum file size that can be uploaded is 200 MB.
Supported file formats are PSD (recommended), PNG, TIFF, PDF, and JPG.

Do you drill screw holes for ○○?

This option exists only for some artwork prints.
If it is the default selection, it will remain the default (manufacturer standard).
If you wish to change it, select "NO".

About Paper

Matte paper is selected as standard.
Paper specifications are as follows.

Matte paper
Base: Specialty paper Thickness: 220µm Surface: Matte Whiteness: 93
High whiteness exclusive paper with firm thickness

Semi-gloss paper
Base: Photographic paper Thickness: 295µm Surface: Semi-gloss Whiteness: 100
Thick, high whiteness photographic paper base

Top: Semi-gloss Bottom: Matte

Template Guide

This is a note for uploading artwork templates.

First, please DL the template you wish to use.
It is in a zip file, so unzip it and you will find a PSD file.

To open the PSD file, use Photoshop or Photopea to open PSD files.
When you open the PSD, you will see the following

The red frame is the overprint area.
The black line is the line to be cut.

To print and cut, the image must be filled up to the red line.
If the black line is not exactly filled in, the image will not be visible because of slight misalignment during cutting and printing.

The following examples are bad examples. 

The top and bottom are filled in to Oveprint, but
This may result in a blank space when cutting.

A correct example is shown below.

Everything up to the red line on the OverPrint layer is filled.
If you are uploading in PSD, please save and upload in this state.

For non-PSD users

Basically, PSD is recommended.
Basically the same as up to the above, but
When saving, delete the following layers.
Oveprint, Guide (if any), Layout, delete these layers, erase the border, and save the file.
An example of saving is shown below.

That is all.
Basically, please upload your work in PSD format so that we can easily check the finished product.